Features
Heavy-Duty Ground Anchors for Commercial & Industrial Use
The GroundGrabba Commercial GR14 range features robust construction designed to handle heavy loads. With thicker 0.6-inch (15mm) shafts, these anchors are built for industrial, commercial, and extreme outdoor use. Whether you’re securing large tarpaulins, shade canopies, festival tents, or outdoor lighting fixtures, GroundGrabba delivers reliable holding power.
GroundGrabba Commercial S (GR14US) – Vertical load test results:
- Beach sand: 158 lb
- Grass, sandy soil: 809 lb
- Grass, dirty damp sand: 312 lb
- Mixed Clay/Loam: 259 lb
- Mixed Clay: 695 lb
*Contact us for bulk ordering
Key Features
- Suited for large-scale outdoor events, camping structures, and vendor setups
- Applicable across industries including aviation, film production, and landscaping
- AS certified for quality assurance
- Not compatible with any of our range of adaptors
How They Work
The GR14 commercial ground anchor range operates on the same principles as the GR13 general-purpose range, but with upgraded specs. Shafts are thicker, hex heads are larger, and lengths are available in 17.7" (450mm), 23.6" (600mm), and 35.4" (900mm).
What’s Included
- 2x GroundGrabba Pro Commercial (17.7 inches / 450mm)
Holding Capacity
In testing, the GR14 delivers 3x to 6x more holding power compared to a spike stake of the same length and girth.
Specifications
- Material: H1018 Carbon Steel, galvanized for corrosion resistance
- Weight: 1.83 lbs (0.83kg)
- Length: 17.7 inches (450mm)
- Shaft Thickness: 0.6 inches (15.5mm)
- Flights (spirals): 0.5" (12.5mm) wide, 0.08" (2mm) thick
- Hex Head: 1-inch AF with collar
- Collar Diameter: 1.6 inches (40mm)
- Flight Diameter: 1.5 inches (38.5mm)
- Compatible Washer Hole: Screws through a 1.18" (30mm) washer hole
Installation Tips
- Use a high-torque impact wrench for installation and removal
- For harder ground, pre-drill a minimum 0.6" (15mm) pilot hole
- Use D or Bow shackles rated to suit your load
Disclaimer
- Do not use where underground services (electricity, gas, water, etc.) are present
- Not for use in timber, concrete, rock, bitumen, or hard rocky ground
- Always hold your drill firmly with both hands during installation
- Some grounds will be impenetrable
Lifetime Warranty
Every GroundGrabba steel product comes with a Lifetime Replacement Warranty against breakage or manufacturer defects. If you encounter an issue, we’ll replace it — no questions asked.* (*Conditions apply.)
Heavy-Duty Ground Anchors for Commercial & Industrial Use
The GroundGrabba Commercial GR14 range features robust construction designed to handle heavy loads. With thicker 0.6-inch (15mm) shafts, these anchors are built for industrial, commercial, and extreme outdoor use. Whether you’re securing large tarpaulins, shade canopies, festival tents, or outdoor lighting fixtures, GroundGrabba delivers reliable holding power.
GroundGrabba Commercial S (GR14US) – Vertical load test results:
- Beach sand: 158 lb
- Grass, sandy soil: 809 lb
- Grass, dirty damp sand: 312 lb
- Mixed Clay/Loam: 259 lb
- Mixed Clay: 695 lb
*Contact us for bulk ordering
Key Features
- Suited for large-scale outdoor events, camping structures, and vendor setups
- Applicable across industries including aviation, film production, and landscaping
- AS certified for quality assurance
- Not compatible with any of our range of adaptors
How They Work
The GR14 commercial ground anchor range operates on the same principles as the GR13 general-purpose range, but with upgraded specs. Shafts are thicker, hex heads are larger, and lengths are available in 17.7" (450mm), 23.6" (600mm), and 35.4" (900mm).
What’s Included
- 2x GroundGrabba Pro Commercial (17.7 inches / 450mm)
Holding Capacity
In testing, the GR14 delivers 3x to 6x more holding power compared to a spike stake of the same length and girth.
Specifications
- Material: H1018 Carbon Steel, galvanized for corrosion resistance
- Weight: 1.83 lbs (0.83kg)
- Length: 17.7 inches (450mm)
- Shaft Thickness: 0.6 inches (15.5mm)
- Flights (spirals): 0.5" (12.5mm) wide, 0.08" (2mm) thick
- Hex Head: 1-inch AF with collar
- Collar Diameter: 1.6 inches (40mm)
- Flight Diameter: 1.5 inches (38.5mm)
- Compatible Washer Hole: Screws through a 1.18" (30mm) washer hole
Installation Tips
- Use a high-torque impact wrench for installation and removal
- For harder ground, pre-drill a minimum 0.6" (15mm) pilot hole
- Use D or Bow shackles rated to suit your load
Disclaimer
- Do not use where underground services (electricity, gas, water, etc.) are present
- Not for use in timber, concrete, rock, bitumen, or hard rocky ground
- Always hold your drill firmly with both hands during installation
- Some grounds will be impenetrable
Lifetime Warranty
Every GroundGrabba steel product comes with a Lifetime Replacement Warranty against breakage or manufacturer defects. If you encounter an issue, we’ll replace it — no questions asked.* (*Conditions apply.)